Want to know if Wiserepeater.com's mobile phone signal booster work for you? Do a simple field test on your mobile phone by use your mobile phone to check the signal quality outside your house.
Step 1 - Go out door your home or office with your mobile phone
Step 2 - Disable WiFi connection on your mobile phone, then you to see what network you're connecting to (2G, 3G, 4G, LTE, etc.).
Step 3 - Take a note of signal bars and the symbol in the status bar of your mobile phone and compare with below chart
Symbol | Mobile Networks | Voice Call | Internet Speed | Email & Notification | Video |
G | GPRS (General Packet Radio Service) |
Yes | 50Kbits/s |
Yes | No |
E | EDGE (Enhanced Data GSM Evolution) |
Yes | 100Kbits/s |
Yes | No |
3G | Third Generation also known as UMTS / WCDMA / CDMA2000 |
Yes | 2Mbits/s | Yes | Yes |
H/H+ | HSPA (High Speed Packet Access) |
Yes | 10-100Mbits/s |
Yes | Yes |
4G | Fourth generation or Long term evolotion also known as LTE or WiMax |
Yes | 100Mbits/s+ |
Yes | Yes |
No Symbol | If signal bars get more than 1 bar you can use voice call |
N/A | No | No | No |
In your mobile phone, you can read signal bars followed by carrier name and network symbol which usually maxes 5~8 bars. To measure mobile phone's signal reception in exact decibels instead of bars or dots, you can follow step 4 to enter Field Test Mode in mobile phones.
Step 4 - In iPhone -- Go into the Phone app and switch to they Keypad. Dial *3001#12345#* and press Call button.
It will launch the Field Test Mode app in your mobile phone, and you will see a negative number of decibel signal strength in left right corner of the screen.
In latest iOS system, it says "Back to Phone" in top left corner, to take decibel signal readings on latest iPhone, you need to display replace signal bars with numerical signal strength. Once in Field Test Mode, press and hold the power button until show "Slide to Power Off", then release it. Then hold the Home button until returned to the main app screen. Now you will see numerical signal strength in iPhone, tap signal numbers you can switch to signal bars. To exit Field Test Mode, you need to reload Field Test Mode and exit it via the Home button.
Step 4 - In Android -- Go to "Settings > About Phone" and numerical signal strength will be available on either network or status which depends on the model of phone. You can also use apps to show signal strength in decibels in Android phones.
Remarks:
1) The numerical value of 2G / 3G / 4G H+ networks is RSSI standard which is Received Signal Strength Indicator. LTE network is RSRP standard which is Reference Signal Receive Power. Hence, you need to turn off LTE on your mobile phone before entering Field Test Mode.
2) Decibel signal strengths will be negative 2~3 digits. Unit of measurement is dB. If your phone show a number such as 98, the actual signal strength is -98dB. The closer the number is to zero, the better the reception, so -90dB is a stronger signal than -100dB.
Easy table of signal bars and decibel signal strengths
Signal Bars | iPhone Mobile | Nokia Phone |
5 | > -85 dBm | > -91 dBm |
4 | -85 ~ -90 dBm | -91 ~ -101 dBm |
3 | -90 ~ -95 dBm | -101 ~ -103 dBm |
2 | -95 ~ -100 dBm | -103 ~ -107 dBm |
1 | -100 ~ -105 dBm | -107 ~ -113 dBm |
0 | < -105 dBm | < -113 dBm |
Leave Your Comment